Infusion Systems
The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and windturbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.
PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding).
Product Selector
|
System
|
Description
|
Hardener
|
Speed
|
Mix ratio
|
Intended Application
|
|
PRIME™ 27
|
Low viscosity, good mechanical properties, very low exotherm in thick sections
|
Fast
|
20 mins
|
100:28
(parts by weight)
|
Suitable for the female moulding of large complex components
|
|
Slow
|
1 hr
|
|
Extra Slow
|
4 hrs
|
|
High Tg
|
3 hrs 20 mins
|
100:25
(parts by weight)
|
For further information, please see the related documents on the side bar or contact your customer support representative.